Skip to content
Mold Remediation Gettysburg PA logoCall

Mold Remediation in Littlestown, PA

Littlestown was laid out in 1765 along King and Queen Streets, and nearly half its homes were built before 1960. We remove mold from its old cellars, mid-century houses and newer homes on the edge of town. Our Gettysburg office is about 10 miles up Route 97, and our phone is answered 24 hours a day.

Open 24 hours · Free, no-obligation estimate

Get a Free Mold Estimate

Answered 24/7. No obligation.

Local housing data

Littlestown Homes by the Numbers

Median year homes were built
1966
Adams County: 1980
Homes built before 1940
26.3%
Adams County: 17.5%
Homes built before 1960
47.1%
Adams County: 29.4%
Homes built since 2000
20.9%
Adams County: 22.3%
Renter-occupied homes
27.7%
Adams County: 21.1%
Housing units
1,971
4,850 residents

Source: U.S. Census Bureau, American Community Survey 2020 to 2024 5-year estimates, via Census Reporter. Littlestown covers 1.8 square miles and sits about 9.7 miles from our Baltimore Street office.

Littlestown is one of the oldest towns in Adams County. Peter Klein laid it out in 1765, fifteen years before Gettysburg, and the borough was incorporated in 1864. It grew as a crossroads, then as a railroad stop, and today it is a commuter town near the Maryland line. Each era left its own kind of house, and each kind holds moisture differently.

How Littlestown's Age Shapes Its Mold Problems

Littlestown's homes are older than the county average. The median home was built in 1966, compared with 1980 across Adams County. About 26.3% of homes date from before 1940, against 17.5% countywide.

The mid-century layer is even bigger. About 47.1% of Littlestown homes were built before 1960, compared with 29.4% for the county. That means a large share of houses were built in the 1940s and 1950s, when concrete block foundations were common.

Growth has continued on the edges of town. About 20.9% of homes were built in 2000 or later, close to the county's 22.3%. About 27.7% of homes are renter-occupied, above the county rate of 21.1%.

Each layer has a typical weak spot. Pre-war homes near the center usually have stone or brick cellars and plaster walls. Block basements from the 1940s and 1950s seep at the mortar joints. Newer homes have tight shells where indoor humidity builds up instead.

King Street, Queen Street and the Old Town Lots

The original town had 84 lots fronting King and Queen Streets. According to the borough's own history, each lot was 66 feet wide and 264 feet deep. The house at 316 East King Street is said to be the oldest in town.

Those long, narrow lots still shape the older part of town. Homes sit close to the street and close to each other, with additions, garages and sheds built out the back. Runoff from all those roofs has to go somewhere, and often it drains toward the oldest foundation on the lot.

Littlestown grew again after the railroad arrived in 1857. The Barker House hotel at King and Queen Streets dates to 1848 and hosted Union generals before the Battle of Gettysburg. The borough's public water system dates to 1895 and its sewer system was built under the WPA in 1941. You can read the full story in the Littlestown Borough history.

Old plumbing in old houses matters for mold. Original cast iron drains, galvanized supply lines and decades of patched connections can leak slowly inside walls and under floors. Those leaks are often a bigger mold source in town than outside flooding.

Outside water still matters on lower lots. If you are buying or finishing a basement, look up the parcel on the FEMA Flood Map Service Center first.

Common Problem Areas in Littlestown Houses

Stone and brick cellars on the old streets

Pre-war cellars along King and Queen Streets breathe ground moisture year round. Mold grows on joists, stair stringers and anything stored against the walls. Musty air from the cellar then rises into the first floor through gaps around pipes and floor boards.

Block basements in mid-century homes

Homes from the 1940s and 1950s often have block walls with paneling or drywall added later. Water seeps through the block after storms and soaks the bottom of the finish. Mold grows on the back side, hidden until it smells.

Kitchens and baths in older rentals

Older rental units often have bathrooms with no exhaust fan and kitchens with recirculating range hoods. Moisture lingers on cold exterior walls. Window frames, ceiling corners and the wall behind the toilet show growth first.

Rear additions on deep lots

Additions built behind older homes often sit over a shallow crawl space. Where the new roof meets the old wall, flashing fails and water runs into the framing. The joint between the two sections is where we look first.

Services That Match Littlestown's Housing

We begin with a free on-site inspection, with moisture meters, a hygrometer and thermal imaging to trace the water. If you need proof for a buyer, tenant or insurer, our mold testing and inspection documents the results.

We follow IICRC S520 and EPA guidance, with containment, negative air, HEPA filtration and HEPA vacuuming. We recommend independent clearance testing on every job. For budgeting, see our page on mold remediation costs. A firm price comes after the inspection. If a buried plumbing leak is the suspect, our guide to finding a hidden water leak walks through the signs.

From Baltimore Street to Littlestown

Our office is at 15-23 Baltimore St in Gettysburg, about 9.7 miles from Littlestown by way of Route 97. We are open 24 hours, 7 days a week, at (717) 420-8919. Learn more about our Gettysburg mold specialists, or see our pages for Germany Township and Union Township, which border the borough.

Mold Questions From Littlestown

My Littlestown house is on one of the original deep lots. Does that affect mold?

It can. The original lots were long and narrow, so many older homes have rear additions, sheds and garages stacked behind them. Water from those roofs often drains toward the main house, and the seams between old and new sections are common leak points. See signs of hidden mold.

Our 1950s Littlestown home has a block basement that smells musty. What causes that?

Concrete block walls are hollow and porous, so ground moisture moves through them, especially after heavy rain. Add stored boxes, carpet or paneling and you have food for mold. Grading, gutters and a dehumidifier usually make the biggest difference after cleanup. Read the right basement humidity level.

Can you work in a rental property in Littlestown?

Yes. About 27.7% of homes in Littlestown are rented. We work with landlords and property managers, and our written scope, moisture readings and photos help with tenant communication and insurance paperwork. See filing a mold insurance claim.

Mold Services Available in Littlestown

  • If you smell something musty, see a stain you can't explain, or are about to buy an older house, a professional mold inspection in Gettysburg, PA tells you what is growing, where the moisture is coming from, and what it will take to fix it. We look at your home the way a moisture detective would, then use air or surface testing only when it answers a real question. You get clear findings in plain language, not a scary lab printout.

    Mold Inspection and Testing

  • Black mold removal in Gettysburg, PA starts with finding the water that feeds the mold, then sealing off the area so spores stay put while we remove what's growing. If you've found dark, slimy patches on drywall, wood, or ceiling tiles, you don't need to panic, but you shouldn't wait either. We're open 24 hours at (717) 420-8919, and we'll tell you plainly what you're dealing with and what it will take to fix.

    Black Mold Removal

  • Basement mold remediation in Gettysburg, PA starts with one fact: most homes here sit on old stone, damp clay soil and a water table that rises every spring, so the space below your floor is the most likely place in the house for mold to grow. We remove mold from basements and crawl spaces, fix the moisture that fed it, and set the space up to stay dry through humid Adams County summers. We're open 24 hours at (717) 420-8919.

    Basement & Crawl Space Mold Remediation

  • Crawl space mold remediation in Gettysburg, PA means cleaning the joists and subfloor, then cutting off the ground moisture that fed the mold. We work in dirt-floor, vented and sealed crawl spaces across Adams County and Hanover, and we're open 24 hours at (717) 420-8919.

    Crawl Space Mold Remediation

  • Attic mold remediation in Gettysburg, PA starts with one question: where is the moisture coming from? We remove mold from roof sheathing, rafters and trusses, fix the ventilation or venting problem that fed it, and treat the wood so the attic stays dry and clean. We're open 24 hours at (717) 420-8919.

    Attic Mold Remediation

  • Bathroom and kitchen mold removal in Gettysburg, PA starts with finding the water: a shower that leaks into the wall, a fan that never vented outside, or a slow drip under the sink. We remove the mold, fix the cause and keep what can be saved. We're open 24 hours at (717) 420-8919.

    Bathroom & Kitchen Mold Removal

  • Water damage mold restoration in Gettysburg, PA starts the moment water gets where it should not be, because the clock on mold growth is already running. We dry the structure, find hidden moisture, remove anything that has started to grow mold, and put your home back on a path to normal. We are open 24 hours at (717) 420-8919 for leaks, floods and burst pipes.

    Water Damage & Mold Restoration

  • Air duct mold removal in Gettysburg, PA works best when the whole HVAC system is treated as one unit: the ductwork, the evaporator coil, the drain pan, the blower and the air handler cabinet. We clean each part, fix the moisture that let mold grow and verify the results, and we're open 24 hours at (717) 420-8919.

    HVAC and Air Duct Mold Remediation

  • Commercial mold remediation in Gettysburg, PA has to fit around tenants, guests, closing dates and business hours, and that is how we plan every job. We work with landlords, property managers, business owners, home sellers and caretakers of historic buildings in Gettysburg, the Adams County seat, and we are open 24 hours when a leak or a failed inspection cannot wait.

    Commercial, Rental and Real Estate Mold Remediation

  • Mold remediation cost in Gettysburg, PA typically runs $500 to $1,500 for a small area under 10 square feet, $1,500 to $6,000 for a basement or crawl space, and $10,000 to $30,000 or more for a whole home. This page breaks down what those numbers include, what pushes a job up or down, how homeowners insurance treats mold, and how to read an estimate so you only pay for work you need.

    Mold Remediation Cost

  • Our mold remediation process follows the IICRC S520 standard step by step, from the first inspection to independent clearance testing and rebuild, so mold in your Gettysburg home is removed at the source and the moisture that fed it is fixed. Here is what happens on a job, what it costs, and how to keep mold away.

    Our Mold Remediation Process

Need Mold Remediation in Littlestown?

We answer 24 hours a day. Free, no-obligation estimate after an on-site look.