Mold Remediation in Conewago Township, PA
Conewago Township wraps around McSherrystown on the Hanover edge of Adams County, and a third of its homes went up after 2000. We remove mold from its newer basements and its older farmhouses alike. Our Gettysburg office is about 11 miles away, and we answer the phone 24 hours a day.
Open 24 hours · Free, no-obligation estimate
Get a Free Mold Estimate
Answered 24/7. No obligation.
Local housing data
Conewago Township Homes by the Numbers
- Median year homes were built
- 1989
- Adams County: 1980
- Homes built before 1940
- 14.1%
- Adams County: 17.5%
- Homes built before 1960
- 25%
- Adams County: 29.4%
- Homes built since 2000
- 33.7%
- Adams County: 22.3%
- Renter-occupied homes
- 12.6%
- Adams County: 21.1%
- Housing units
- 3,319
- 7,964 residents
Source: U.S. Census Bureau, American Community Survey 2020 to 2024 5-year estimates, via Census Reporter. Conewago Township covers 10.4 square miles and sits about 11.2 miles from our Baltimore Street office.
A Township of Newer Homes Around an Older Core
Conewago Township has a younger housing stock than most of Adams County. The median home here was built in 1989, compared with 1980 for the county as a whole.
About 33.7% of homes in the township were built in 2000 or later. Across Adams County, that figure is 22.3%. That makes Conewago one of the faster-growing places in the county over the last two decades.
The older layer is still here. About 14.1% of homes were built before 1940, and 25.0% before 1960. Countywide, those shares are 17.5% and 29.4%.
Most homes are owner-occupied. Only 12.6% of households rent, well under the county rate of 21.1%. That means most of our calls here come from owners dealing with their own basements and attics.
Newer homes usually sit on poured concrete or block foundations, many with finished lower levels. Those basements are dry most of the year but can hold humid air in summer. Carpet and drywall laid against concrete give mold the food it needs once humidity climbs.
The pre-1940 farmhouses tell a different story. Many have stone foundations, plaster walls and little or no insulation. Moisture moves through old masonry slowly and steadily, so damp joists and musty storage areas are common.
Creeks, the Basilica and the Hanover Edge
Conewago Township sits along the eastern edge of Adams County, next to the borough of Hanover in York County. It completely surrounds the borough of McSherrystown, and it includes the Midway community.
The South Branch of Conewago Creek runs through this area. The old Conewago Chapel Covered Bridge crossed it here until a fire destroyed the bridge in 1985. Homes on lower ground near the stream see wetter soil after storms, which pushes water against foundation walls.
The township is also home to the Basilica of the Sacred Heart of Jesus, often called Conewago Chapel. The stone church dates to 1787, a reminder of how long people have farmed and built here.
That long history shows in the mix of houses. A 1990s colonial and a 19th-century stone farmhouse can sit a mile apart, and each fails in its own way. Our inspection starts by figuring out which kind of house we are standing in.
If you live near a stream, check your parcel on the FEMA Flood Map Service Center. Even outside a mapped flood zone, high groundwater after heavy rain can wet a basement floor.
Common Mold Problems in Conewago Township Homes
Finished basements in newer subdivisions
The most frequent call here is a musty finished basement. We often find mold on the back of drywall, on carpet pad, and on the bottom plate of framed walls. The cause is usually summer humidity or a slow leak at a window well.
Attics with blocked airflow
Newer homes are built tight. When bath fans vent into the attic or soffit vents get covered by insulation, warm wet air condenses on the roof sheathing in winter. Black spotting on the north-facing slope is the usual sign.
Stone foundations in older farmhouses
In the township's older homes, mold tends to grow on sill plates, floor joists and stored items near stone walls. White crusty deposits on the stone are often mineral salts, not mold, but they still show that water is moving through.
Water heaters and sump pumps
A failed sump pump or a leaking water heater can soak a lower level in hours. Drywall and carpet that stay wet past a day or two become prime places for growth.
Matching the Work to the House
Most jobs here start with a mold inspection and moisture mapping. We use moisture meters, a hygrometer and thermal imaging to find the wet areas you cannot see.
For finished lower levels, our basement mold cleanup work covers containment, removal of damaged drywall and carpet, HEPA cleaning and drying. If the attic is the problem, see our attic sheathing mold service.
A burst pipe or failed pump needs drying and mold work together. That is what our water damage and mold restoration service handles.
Wondering about price? Our guide to mold remediation pricing explains the ranges. A small area under 10 square feet usually runs about $500-$1,500, and a basement or crawl space about $1,500-$6,000. We give a firm price only after we inspect.
If your basement is finished, our article on mold in finished basements explains what to check behind the walls.
Reaching Conewago Township From Gettysburg
Our office is at 15-23 Baltimore St in Gettysburg, about 11.2 miles from Conewago Township. We are open 24 hours a day, 7 days a week, at (717) 420-8919.
Every job follows IICRC S520 and EPA guidance, and we recommend independent clearance testing before rebuilding. You get a written scope, moisture readings and photos you can share with your insurer.
We also work right next door in McSherrystown and across the county line in Hanover. To learn more about the company, start with our Gettysburg-based mold remediation team.
Mold Questions From Conewago Township
Can a basement in a newer Conewago Township home grow mold?
Yes. Many homes here were built after 2000, and new poured concrete releases moisture for months after construction. Finished basements with carpet, drywall and boxed storage can trap that damp air. A dehumidifier and a hygrometer reading under 60% go a long way. More on mold in new construction homes.
My property backs up to the South Branch of Conewago Creek. What should I watch for?
Watch the lowest level after heavy rain. Ground near streams stays wet longer, so basement walls and crawl spaces can take on water even without a visible flood. Check the FEMA flood map for your parcel and dry any wet material within one to two days. See what to do about mold after flooding.
Do you work on older stone farmhouses in the township?
Yes. Older homes with fieldstone foundations need a different approach than newer poured walls. We clean and dry the masonry and framing, and we avoid sealing old stone in a way that traps moisture. Read about mold in stone foundation basements.
Mold Services Available in Conewago Township
If you smell something musty, see a stain you can't explain, or are about to buy an older house, a professional mold inspection in Gettysburg, PA tells you what is growing, where the moisture is coming from, and what it will take to fix it. We look at your home the way a moisture detective would, then use air or surface testing only when it answers a real question. You get clear findings in plain language, not a scary lab printout.
Mold Inspection and Testing
Black mold removal in Gettysburg, PA starts with finding the water that feeds the mold, then sealing off the area so spores stay put while we remove what's growing. If you've found dark, slimy patches on drywall, wood, or ceiling tiles, you don't need to panic, but you shouldn't wait either. We're open 24 hours at (717) 420-8919, and we'll tell you plainly what you're dealing with and what it will take to fix.
Black Mold Removal
Basement mold remediation in Gettysburg, PA starts with one fact: most homes here sit on old stone, damp clay soil and a water table that rises every spring, so the space below your floor is the most likely place in the house for mold to grow. We remove mold from basements and crawl spaces, fix the moisture that fed it, and set the space up to stay dry through humid Adams County summers. We're open 24 hours at (717) 420-8919.
Basement & Crawl Space Mold Remediation
Crawl space mold remediation in Gettysburg, PA means cleaning the joists and subfloor, then cutting off the ground moisture that fed the mold. We work in dirt-floor, vented and sealed crawl spaces across Adams County and Hanover, and we're open 24 hours at (717) 420-8919.
Crawl Space Mold Remediation
Attic mold remediation in Gettysburg, PA starts with one question: where is the moisture coming from? We remove mold from roof sheathing, rafters and trusses, fix the ventilation or venting problem that fed it, and treat the wood so the attic stays dry and clean. We're open 24 hours at (717) 420-8919.
Attic Mold Remediation
Bathroom and kitchen mold removal in Gettysburg, PA starts with finding the water: a shower that leaks into the wall, a fan that never vented outside, or a slow drip under the sink. We remove the mold, fix the cause and keep what can be saved. We're open 24 hours at (717) 420-8919.
Bathroom & Kitchen Mold Removal
Water damage mold restoration in Gettysburg, PA starts the moment water gets where it should not be, because the clock on mold growth is already running. We dry the structure, find hidden moisture, remove anything that has started to grow mold, and put your home back on a path to normal. We are open 24 hours at (717) 420-8919 for leaks, floods and burst pipes.
Water Damage & Mold Restoration
Air duct mold removal in Gettysburg, PA works best when the whole HVAC system is treated as one unit: the ductwork, the evaporator coil, the drain pan, the blower and the air handler cabinet. We clean each part, fix the moisture that let mold grow and verify the results, and we're open 24 hours at (717) 420-8919.
HVAC and Air Duct Mold Remediation
Commercial mold remediation in Gettysburg, PA has to fit around tenants, guests, closing dates and business hours, and that is how we plan every job. We work with landlords, property managers, business owners, home sellers and caretakers of historic buildings in Gettysburg, the Adams County seat, and we are open 24 hours when a leak or a failed inspection cannot wait.
Commercial, Rental and Real Estate Mold Remediation
Mold remediation cost in Gettysburg, PA typically runs $500 to $1,500 for a small area under 10 square feet, $1,500 to $6,000 for a basement or crawl space, and $10,000 to $30,000 or more for a whole home. This page breaks down what those numbers include, what pushes a job up or down, how homeowners insurance treats mold, and how to read an estimate so you only pay for work you need.
Mold Remediation Cost
Our mold remediation process follows the IICRC S520 standard step by step, from the first inspection to independent clearance testing and rebuild, so mold in your Gettysburg home is removed at the source and the moisture that fed it is fixed. Here is what happens on a job, what it costs, and how to keep mold away.
Our Mold Remediation Process
Need Mold Remediation in Conewago Township?
We answer 24 hours a day. Free, no-obligation estimate after an on-site look.
